Many men are not satisfied with the parameters of their sexual organ and do not want to endure it.Therefore, different methods are used to help make the penis more often and long.Even a device as a pump to increase a member is widely used.
The operating principle of the device
Pomp is a cylindrical device.The device is designed to increase the penis of a man in length and width, as well as to increase erection.
The pump acts according to a simple principle.When used around the male penis, pressure occurs, which helps to increase blood flow, fill the cavernous bodies of blood.The same thing happens as with an erection.The penis becomes very hard, swells, which allows you to increase its parameters.
Variety of pumps and pumping
The pump to increase the penis, regardless of the type, has a single structure of the structure.It is a transparent ball that depicts centimeters.There are also devices with which a void is created and the necessary pressure is maintained.
There are three types of pumps:
- Manual.The void is created using a piston or pear.These devices have a lower cost, therefore they are often used.However, men have to wait a long time for their use for their use.
- Automatic.In this type of pump, the pressure in the ball is created thanks to the electric pump, which is already integrated into the device.For his work, it is necessary to insert batteries.Automatic devices are more preferable, as they have high efficiency, allow to control pressure and absorption.
- Waterfall.The most new type of pump.It differs as the water is used in place of the air.Such a variety of increased, effective increase, has few contraindications and serves much longer than previous models.
Pomping is made in two ways.The first is called packaging.Its essence is to stretch the tunic and an increase in the penis in length, but not in width.To do this, use a narrow ball in which the penis cannot swell on the sides, but will extend.
The second method is classic pumping.In this case, a large ball is used, in which the penis has the opportunity to swell in all directions.This allows you to increase the width and length of the organ.
During the exercises, safety precautions must be observed.
Criteria of choice
The lover pump is selected taking into account the size of the penis and the purpose of its use.Experts recommend the following:
- The length of the device should be greater than 3 cm.
- The width should be higher than the penis diameter for 2 cm.
- For beginners, it is recommended to choose a type of manual device, as it is the simplest.
The above dimensions of the member are taken into consideration only in a state of excitement.
In the purchase process, it is worth paying attention to the materials from which it has increased.The ball should be strong enough to avoid random damage to the male organ.
Contraindications
It is not allowed to use an increase in emptiness in men suffering from the following pathologies:
- Thrombosis.
- Fibrosis.
- Liver diseases.
- Nephropathy.
- Diabetes.
- Pathologies of the heart and blood vessels.
- Sexual transmission diseases.
- By dignment in the work of the universe.
If a man is not sure he can use a pump to increase the length and width of the penis, it is worth visiting the doctor for the exam.
Pros and cons
The void pump allows men not only to make their dignity longer and wider.The device also helps to improve the erectile function, prolong sexual contact by reducing the sensitivity of the organ.In addition, the device allows you to adjust the shape of the penis, even in the presence of curvature.
The negative sides of the pump are manifested only with its improper use.Failure to comply with the instructions involves many unpleasant consequences.
The effect of use
If you constantly use the pump, after 6 months the penis will change its size forever.To obtain the maximum effect, it is recommended to take drugs at the same time that increase the production of sex hormones in men.But this can only be done after consulting a doctor.
It is worth knowing that a pump and a pump to increase the penis are the same thing.
Those, then have already tried the pump, noticed that they were able to achieve the desired result.Six months later, the length of the penis increases by 3 cm and the thickness - by 2 cm.
Instructions for use
To use an empty pump to increase the penis, no need for special skills.Before the procedure, the device must be treated with lubrication to ensure scrolling.
A male member is needed to lubricate with a special cream, the effect of which allows us to normalize the bloodstream, improve a bloodstream to the penis.
Then place the genitals in the cylinder.Eliminates the air from the ball to create an emptiness.As soon as redness occurs, you need to wait 30 seconds and start the air.The procedure should not last more than 15-20 minutes.
Possible consequences
It is not surprising that special education has been created for the use of the pump.The implementation of all manipulations strictly on it avoids negative consequences.But sometimes men neglect the rules.
Consequently, instead of the desired centimeters, they receive the following:
- The emergence of a swollen ring at the base of the penis head.This occurs due to the stagnation of the lymphatic fluid.This phenomenon can also occur with the correct use of an empty device.If you observe this side effect, you need to stop using the device.
- The swelling of the penis due to the influx of a large amount of lymph.
- Deterioration of the erectile function.
- Redness of the penis, the appearance of bleeding.
- Thrombosis.The disease represents a great threat to human life, but when using the pump it is extremely rare.
So that there are no negative consequences, but it is important not only to use the pump correctly.It is also necessary not to ignore the presence of contraindications for its application.If they are, then you should look for other methods to increase the penis.
Homemade devices
For men who do not want to spend money on the purchase of an increase in the factory, it is possible to do it at home with your own hands.
From the cuff pump
To create an Airless environment, you need to promote the cap pump, turn the bracelet with the back.Therefore it is necessary to assemble the device again, but already in the reverse order.
Subsequently, it is necessary to create a valve designed to get out of excess air.For this purpose, it is possible to apply the valve from the aquarium compressor.It must be connected to an appropriate tube and estate.
By the compressor
You can take the compressor from unnecessary refrigeration equipment.After extracting the evaporator and the capacitor, the tubes with which they are connected should be cut.Subsequently, connect the network compressor.
In any shop for motorists, take an air filter.It must be attached to the compressor's hole.The filter must be connected to the rubber tube of the required size.Subsequently, it remains only to try the effect of the device.
The pump helps, but the use of drugs containing testosterone or the use of an extension with the use of a pump, gives a greater effect with the use of a pump.
Using a syringe
Take a plastic tube, cut three parts, the size of each should be 10 cm.Attack to the tee.The result is a tee of three bastards.
To the central retreat to attack a syringe nose.On the match side, install the valves.
It is important that one opens and the second - inside.In order not to get confused in the future, you should draw arrows that will indicate the direction of the air.
Using plastic bottles
A rather simple pump to increase the penis can be created by normal plastic bottles.It is only important to choose a different size of containers.What is larger must cut the upper part to make the shape of the cylinder.
In the lower part of the second bottle, do some holes and insert it in the first container.It is important that a large space is not formed between the walls.Then you need to connect the tube to a large container.You can take it from the pump to pump the wheels by bicycle.
Take care of the device
To maximize the extension of the duration of the service, it is necessary to take care correctly.If the device is purchased only and has not yet been used, it is necessary to rinse it completely with soap and then dry and treated with any antiseptic.Then, wash the device after each use.
It is not possible to treat the pump with hydrogen peroxide or boiling water, as well as use fat with fat during the lubricant procedure.Otherwise, the risk of damage is high.